077-101d110

Xerox D110 Error 077-101: Exit Jam Fix

The Xerox D110 error 077-101 points to a paper jam occurring at the output stage. This fault happens when the paper transport system doesn't clear the last set of exit sensors. Learn how to fix error 077-101 on D110 by inspecting the finisher and exit rollers.

1 views

Common causes

  • 1Overlapping Sheets: Multiple pages at once.
  • 2Debris: Small scraps in the path.
  • 3Worn Rollers: Insufficient exit traction.
  • 4Sensor Failure: Stuck actuator arm.

Solutions

Diagnóstico rápido

Error 077-101 is an end-of-path jam. If the paper appears slightly crumpled at the tray, it is likely caught on the exit guides.

Solución paso a paso

  1. Open the finisher or output cover.
  2. Look for paper trapped at the exit gate.
  3. Remove the sheets smoothly.
  4. Check for any shredded paper near the sensors.
  5. Close the module and clear the fault on the display.

Prevención y mantenimiento

Regularly clean the exit rollers. Avoid printing on labels or thick media without verifying the paper path settings in the machine's menu.

Cuándo llamar a un técnico

If the error keeps triggering despite a clear paper path, the exit sensor board may need to be replaced.

Ficha técnica del equipo

  • Technology: Monochrome Printer.
  • Speed: 110 ppm.
  • Connectivity: Ethernet, USB.
  • Capacity: High.
  • Consumable: D110 Toner.
  • Recommended use: Production.
  • Official drivers / firmware

Steps to follow

  1. 1

    Open cover

    Open the exit door or finisher module.

  2. 2

    Clear

    Gently remove stuck paper.

  3. 3

    Inspect

    Check for paper scraps near sensors.

  4. 4

    Close

    Close the cover firmly.

Frequently asked questions

Paper reached the exit sensor but didn't pass through correctly.

It is a common jam, but needs careful removal so paper doesn't rip.

D110 toner.

Avoid staples near edges that could catch during exit.

Xerox D110 Error 077-101: Exit Jam Fix | Vimazdev