075-100B225

Xerox B225 Error 075-100: Paper Feed Issue

The Xerox B225 error 075-100 is a paper input failure code. It occurs when the paper tray fails to feed sheets into the printer mechanism properly. Often, simply realigning the paper or clearing small debris from the feed rollers solves the problem.

1 views

Common causes

  • 1Incorrect paper alignment in the tray.
  • 2Worn pickup rollers preventing sheet grip.
  • 3Small paper scraps blocking the sensor.
  • 4Overfilled paper tray exceeding capacity.

Solutions

Diagnóstico rápido

If you encounter the Xerox B225 error 075-100, ensure the tray is fully seated. Users often ask my Xerox B225 shows error 075-100 when the guides are too tight, causing the paper to warp during the pick-up cycle, which the sensor detects as a feed error.

Solución paso a paso

  1. Remove Tray: Completely pull out the main tray.
  2. Check: Look for any torn paper scraps in the feed path.
  3. Align: Fan the paper stack and ensure the guides are snug but not tight against the stack.
  4. Clean: Wipe the pickup rollers with a damp cloth if they appear dusty.

Prevención y mantenimiento

Store paper in a climate-controlled area to prevent humidity, which causes pages to stick together. Periodically clean the rollers to maintain consistent grip strength.

Cuándo llamar a un técnico

If mechanical cleaning doesn't resolve the feed failure, the internal feed motor or tray sensor might need professional assessment.

Ficha técnica del equipo

  • Technology: Multifunction Laser
  • Speed: 36 ppm
  • Paper Capacity: 250 sheets
  • Paper Weight: 60-163 g/m²
  • Consumibles: B225 series toner
  • Official drivers / firmware

Steps to follow

  1. 1

    Remove tray

    Pull out the main paper tray completely from the printer.

  2. 2

    Check for jams

    Inspect the feed path for any crumpled paper or debris.

  3. 3

    Adjust guides

    Align the paper side guides properly to the paper size.

  4. 4

    Reinsert

    Slide the tray back in smoothly and resume printing.

Frequently asked questions

This indicates that the paper tray is either empty, misaligned, or the feed sensor is blocked.

Fanning the paper sheets before loading and avoiding overfilling the tray helps prevent most feed issues.

Yes, heavy or damp paper can cause the printer to struggle, triggering a feed error.

If you continue to get this error despite proper paper loading, the pickup rollers likely require cleaning or replacement.

Xerox B225 Error 075-100: Paper Feed Issue | Vimazdev