062-370B210DNI

Fixing Xerox B210DNI Error 062-370: Network Guide

Xerox B210DNI error 062-370 typically indicates a communication failure between the printer and the host workstation. By checking your network settings and ensuring a static IP address, you can usually clear this alert. Knowing why my Xerox B210DNI shows error 062-370 helps in maintaining consistent office productivity.

0 views

Common causes

  • 1IP address conflicts within the local network.
  • 2Outdated firmware failing to handshake with new network switches.
  • 3Poor quality physical cable connection.
  • 4Buffer overflow due to large, complex print jobs.

Solutions

Quick Diagnostics

This error appears as a connection timeout on the device screen when it cannot reach the gateway.

Step-by-Step Solution

  1. Disconnect the ethernet cable and power cycle the printer.
  2. Access the printer EWS via a browser.
  3. Assign a static IP address to the device.
  4. Reset the printer driver on your host computer.

Prevention and Maintenance

Update firmware regularly. Use high-quality networking cables to prevent signal loss.

When to Call a Technician

If the interface remains unresponsive after a factory reset, the network board may need professional repair.

Device Technical Sheet

  • Technology: Monochrome Laser.
  • Speed: 31 ppm.
  • Connectivity: Ethernet, USB 2.0, Wi-Fi.
  • Consumable: Toner 106R04348 (B210 series).
  • Official Xerox Support

Steps to follow

  1. 1

    Power Cycle

    Turn off the printer and wait one minute before restarting.

  2. 2

    Check IP

    Verify network settings in the printer menu.

  3. 3

    Update Firmware

    Download the latest version from the Xerox support page.

Frequently asked questions

It is a network communication error indicating the printer cannot establish a stable session.

No, it is usually a software-level configuration issue.

Use genuine Xerox 106R04348 toners for optimal performance.

Perform maintenance every 5,000 pages to avoid paper feed issues.