061-320Versant 4100 Press

Error 061-320 Xerox Versant 4100: Density Sensor Fault

The Xerox Versant 4100 Press error 061-320 indicates a critical failure in the automatic Image Density (ID) sensing system. If the sensor cannot read the registration marks on the transfer belt, the system cannot calibrate, resulting in significant color output degradation. Cleaning the sensor surface is the first essential step in resolving this code.

0 views

Common causes

  • 1Toner dust blocking the ID sensors.
  • 2Transfer belt wear-and-tear.
  • 3Sensor light obstruction.
  • 4Faulty density sensor module.

Solutions

Diagnóstico rápido

Error 061-320 confirms that the ID sensors failed to detect color patches. If the transfer belt is covered in excess toner, the sensors become blind, preventing successful calibration.

Solución paso a paso

  1. Clean ID Sensors: Locate the sensors near the transfer belt and wipe gently with a dry, soft cloth.
  2. Check Belt: Verify that the transfer belt surface is clear of toner debris.
  3. Power Cycle: Reset the press to prompt a new calibration attempt.
  4. Fiery Calibration: Perform a full color calibration once the system initializes correctly.

Prevención y mantenimiento

Perform weekly maintenance on the transfer belt as specified in the service guide. This prevents toner buildup that triggers sensor errors. Use only the high-quality stock allowed by the press to keep internal contamination to a minimum.

Cuándo llamar a un técnico

If the sensors remain unresponsive after a thorough cleaning, the sensor unit or the main interface board may require professional testing or replacement.

Ficha técnica del equipo

  • Technology: Production Color Press
  • Speed: 100 ppm
  • Connectivity: Fiery Print Server
  • Capacity: High-capacity module
  • Compatible Consumables: EA Dry Toner (Versant series)
  • Recommended Use: High-volume commercial print
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Clean sensors

    Carefully clean the ID sensors with a dry, lint-free cloth.

  2. 2

    Power cycle

    Reset the system to re-initialize the calibration sequence.

  3. 3

    Calibrate

    Run the color calibration utility via Fiery.

Frequently asked questions

The image density sensors cannot read the color patches on the transfer belt.

You will notice inaccurate colors and poor registration.

Always use original EA Dry toner for Versant presses.

If cleaning doesn't fix it, a technician must verify the sensor hardware.

Error 061-320 Xerox Versant 4100: Density Sensor Fault | Vimazdev