045-310d110

Xerox D110 Error 045-310: Fuser Thermal Fault

The Xerox D110 error 045-310 is a serious thermal alert indicating that the fuser system is not operating within safe temperature parameters. The printer will lock down to prevent damage. This guide outlines how to handle error 045-310 on D110 safely and why technician intervention is essential.

1 views

Common causes

  • 1Thermistor Failure: Incorrect temperature readings.
  • 2Heating Element: Lamp burned out.
  • 3Blocked Airflow: Overheating due to dust/obstructed vents.
  • 4Board Fault: Electrical management error.

Solutions

Diagnóstico rápido

Error 045-310 is a fuser thermal failure. If the machine emits heat or reports this immediately, the heating element or thermostat is failing.

Solución paso a paso

  1. Turn off the printer power.
  2. Unplug for 15 minutes to allow cooling.
  3. Verify clear airflow at the rear vents.
  4. Connect directly to the wall outlet (no UPS).
  5. If the error continues, schedule a service visit.

Prevención y mantenimiento

Keep the rear ventilation area free from dust. Ensure the printer room is climate-controlled, as high ambient temperatures can exacerbate thermal faults.

Cuándo llamar a un técnico

Error 045-310 is a hardware failure. Attempting to fix it yourself can result in severe thermal injuries or permanent printer damage.

Ficha técnica del equipo

  • Technology: Monochrome Printer.
  • Speed: 110 ppm.
  • Connectivity: Ethernet, USB.
  • Capacity: High.
  • Consumable: D110 Toner.
  • Recommended use: Production.
  • Official drivers / firmware

Frequently asked questions

It indicates a critical fuser temperature fault, either due to overheating or failure to reach temperature.

Yes, turn it off immediately to prevent further damage to the thermal system.

D110 toner.

Yes, this is a hardware thermal issue requiring parts replacement.

Xerox D110 Error 045-310: Fuser Thermal Fault | Vimazdev