042-327D110

Xerox D110 error 042-327: Solution Guide

The Xerox D110 error 042-327 is a communication timeout occurring when the print controller fails to receive signals from the engine. This halts processing and disables printing tasks. A synchronized power cycle is usually the first effective step in resolving this linkage issue.

1 views

Common causes

  • 1Handshake synchronization timeout.
  • 2Loose interface cable.
  • 3Print server OS lockup.
  • 4Interrupted network traffic.

Solutions

Quick Diagnosis

If the D110 displays 042-327, check the status lights on your print server (Fiery). If the lights are unresponsive, it is a communication link failure.

Step-by-Step Solution

  1. Shutdown: Power off the print controller.
  2. Power down engine: Power off the copier engine.
  3. Interface check: Ensure the cross-over cable is undamaged.
  4. Startup: Power on copier engine first, let it reach 'Ready', then power on controller.

Prevention and Maintenance

Always shut down the print controller properly to protect its operating system data files. Keep network connectivity consistent.

When to call a technician

If repeated power sequences fail to clear 042-327, the internal controller interface card may be failing.

Technical Data

  • Technology: Monochrome Laser High-Production
  • Performance: 110 ppm
  • Connectivity: Ethernet
  • Feeder capacity: 8,050 sheets
  • Consumables: High capacity D110/D125 toner
  • Usage: Production
  • Official Drivers / firmware

Steps to follow

  1. 1

    Shutdown controller

    Perform a proper software shutdown on the Fiery/controller.

  2. 2

    Check interface cable

    Verify the communication cable between engine and controller.

  3. 3

    Sequence startup

    Power on the copier, wait for readiness, then turn on controller.

Frequently asked questions

The print controller is unable to talk to the copier engine, causing a handshake time-out.

Usually no, these are temporary communication synchronisation errors.

Uses D110/D125 high capacity toner.

Follow correct power-off procedures to avoid system registry corruption.