042-326VersaLink B610

Xerox VersaLink B610 Error 042-326 Fix

The Xerox VersaLink B610 error 042-326 indicates a failure within the transfer belt assembly. My Xerox VersaLink B610 shows error 042-326, what now? This code denotes a synchronization error that prevents the paper from receiving the toner image correctly.

1 views

Common causes

  • 1Belt degradation.
  • 2Toner dust buildup.
  • 3Paper path obstruction.
  • 4Motor drive failure.

Solutions

Quick Diagnosis

Look for error sounds during start-up. If the belt motor sounds strained, there's likely a blockage or friction in the transfer unit.

Step-by-step Solution

  1. Turn off and unplug the printer.
  2. Access the internal imaging area.
  3. Carefully inspect the belt for wear.
  4. Clean sensors using compressed air.

Prevention and Maintenance

Do not overload the printer with incompatible media. Quality toner ensures the transfer belt doesn't get covered in abrasive debris.

When to Call a Technician

If the error persists after manual cleaning, the motor assembly likely failed.

Equipment Technical Data

  • Technology: Laser
  • Speed: 58 ppm
  • Consumable: Genuine Xerox Toner
  • Part: Transfer Belt Unit
  • Drivers / firmware

Steps to follow

  1. 1

    Open cover

    Gain access to the imaging unit.

  2. 2

    Check belt

    Verify proper tension on the transfer belt.

  3. 3

    Clean

    Remove residual toner from the area.

Frequently asked questions

Check for obstructions or paper residue near the transfer belt.

If the belt is undamaged, cleaning might fix it. If cracked, replacement is needed.

Genuine Xerox toner to prevent damage to the transfer belt unit.

Every 50,000 prints to maintain output quality.

Xerox VersaLink B610 Error 042-326 Fix | Vimazdev