042-326Xerox Phaser 6510

Fix Xerox Phaser 6510 Fuser Error 042-326

Error code 042-326 on the Xerox Phaser 6510 indicates a fuser unit fault, specifically a failure to reach or maintain operating temperature. This is a safety-critical error. Following these cooling and checking procedures can often clear temporary faults.

1 views

Common causes

  • 1Fuser temperature sensor malfunction.
  • 2Power supply voltage fluctuations.
  • 3Excessive heat due to continuous long print jobs.

Solutions

Cooling Period

  1. Turn off the printer immediately.
  2. Disconnect the power cord for 30 minutes.
  3. Restart and observe the initialization process.

Power Stability Check

  1. Ensure the printer is plugged into a dedicated outlet.
  2. Remove any surge protectors if you suspect power drops.
  3. Check for paper obstructions near the fuser unit.

Steps to follow

  1. 1

    Immediate Shutdown

    Turn off the printer power switch.

  2. 2

    Paper Path Inspection

    Open the rear cover to check for jammed paper.

  3. 3

    Thermal Recovery

    Leave the printer off for at least 30 minutes.

Frequently asked questions

It is a fuser unit heat-up failure error code.

No, it requires immediate power-off to avoid heat damage.

If the error persists after a full power cycle, the fuser unit may need professional replacement.

Fix Xerox Phaser 6510 Fuser Error 042-326 | Vimazdev