042-326D95A

Xerox D95A error 042-326: Troubleshooting guide

The Xerox D95A error 042-326 indicates a failure in the image registration process. This system alert appears when the printer cannot synchronize the paper position correctly. To address this, perform a power cycle and inspect the input trays for debris. This model is built for high-volume production, so maintaining sensor cleanliness is essential for uptime.

2 views

Common causes

  • 1Sensor blockage due to paper dust or foreign objects.
  • 2Mechanical misalignment in the paper path.
  • 3Outdated firmware failing to manage registration cycles.
  • 4Use of heavy media not supported by the current tray settings.

Solutions

Quick Diagnosis

The error occurs when the internal registration sensors fail to detect the paper lead edge.

Troubleshooting steps

  1. Power off the printer via the main switch.
  2. Unplug the power cord for a full minute.
  3. Inspect all paper trays to ensure the media is properly loaded.
  4. Restart the system to initiate automatic calibration.

Prevention and Maintenance

Use only high-quality paper stocks. Regularly clean the rollers to prevent dust buildup. Using genuine consumables is critical to ensure proper sensor detection.

When to call a technician

If the error persists after a hard reset, a hardware component, such as the registration sensor or motor, may be failing.

Technical specifications

  • Technology: Production Laser Printer
  • Speed: 95 ppm
  • Connectivity: Ethernet 10/100/1000
  • Consumable compatible: Xerox D95 Series Toner
  • Official drivers

Steps to follow

  1. 1

    Power off

    Switch off the D95A using the main power button and unplug for 60 seconds.

  2. 2

    Check tray

    Remove paper trays and ensure no debris is blocking the sensors.

  3. 3

    Reboot

    Reconnect the power and turn on the system to recalibrate.

Frequently asked questions

This error appears when the registration sensor fails to detect paper position.

It is a registration fault that stops printing; a reboot usually solves it.

Always use original Xerox toner to avoid sensor interference.

Regularly clean the feed rollers and use recommended paper weights.

Xerox D95A error 042-326: Troubleshooting guide | Vimazdev