042-326AltaLink C8145

Fix Xerox AltaLink C8145 Error 042-326: Troubleshooting Guide

Error code 042-326 on the Xerox AltaLink C8145 identifies a failure within the color registration system. This occurs when the machine's sensors fail to identify alignment marks on the transfer belt. Prompt resolution is necessary to maintain high-quality color output.

1 views

Common causes

  • 1Toner buildup on the registration sensors.
  • 2Physical damage to the image transfer belt.
  • 3Controller board failure regarding registration motors.

Solutions

Sensor Cleaning

  1. Open the machine front cover.
  2. Locate the registration sensors near the transfer belt.
  3. Wipe the sensor window gently with a dry, lint-free cloth.

Run Auto-Calibration

  1. Navigate to the 'Tools' menu on the UI.
  2. Go to 'Quality Adjustments'.
  3. Select 'Color Calibration' to trigger a system reset.

Steps to follow

  1. 1

    Power Cycle

    Power off the device and unplug it from the wall for at least 30 seconds.

  2. 2

    Inspect Belt

    Ensure there is no stuck paper or toner debris on the transfer belt surface.

  3. 3

    Reboot

    Reconnect power and restart the device to check for error resolution.

Frequently asked questions

No, please use a dry cloth only. Chemicals may degrade the sensitive optics of the sensor.

If cleaning fails, the internal sensor may be physically faulty and require professional replacement.

You will notice blurry prints or misaligned colors on your documents.