031080EcoTank L8180

Epson EcoTank L8180 Error 031080: Ink Problem

The Epson EcoTank L8180 error 031080 indicates an anomaly in the ink supply, likely caused by an air bubble or an obstruction in the internal hose. This error prevents the printer from completing the ink charging necessary to print correctly. Printhead cleaning is usually the recommended solution.

0 views

Common causes

  • 1Air ingress in hoses due to very low ink levels.
  • 2Nozzle obstruction due to dried ink.
  • 3Ink pump pressure sensor failure.
  • 4Use of non-original inks that block the system.

Solutions

Quick Diagnosis

The 031080 code warns of a critical interruption in the ink flow from the tank to the printhead nozzles.

Step-by-Step Solution

  1. Level Check: Ensure all tanks have at least 1/4 of their capacity.
  2. Panel Cleaning: Access 'Maintenance' -> 'Head Cleaning' and execute the cycle.
  3. Purge: If the problem persists, use the 'Initial Ink Charge' function (use cautiously as it consumes ink).

Maintenance and Prevention

Print at least once a week to prevent the ink from drying inside the printhead.

When to Call a Technician

If the error continues after two cleaning cycles, the suction pump likely needs specialized maintenance.

Device Technical Specs

  • Technology: 6-color Ink Tank
  • Speed: 32 ppm
  • Connectivity: Wi-Fi/USB/Ethernet
  • Consumable: Epson 114 Ink
  • Support: Epson Support.

Frequently asked questions

This error signals an issue with the ink pumping system or a blockage in the flow to the printhead.

Perform a printhead cleaning from the control panel. If it doesn't work, verify ink levels are correct.

Uses original Epson 114 series ink bottles.

Yes, if printing is forced, it may burn the printhead; stop use if the error persists.