016-781Xerox Phaser 6510

Fix Xerox Phaser 6510 Network Error 016-781

Error code 016-781 on the Xerox Phaser 6510 relates to network communication timeouts. It is often caused by IP address conflicts or firmware communication issues. Follow these steps to restore stable network printing.

1 views

Common causes

  • 1DHCP IP address conflict.
  • 2Disabled network services.
  • 3Network timeout during data transmission.

Solutions

Power Cycle Network Hardware

  1. Disconnect Ethernet cables.
  2. Power off the printer.
  3. Restart your local router and printer.

Verify IP Settings

  1. Log in to the web interface (CentreWare).
  2. Review IPv4/IPv6 settings.
  3. Switch to static IP if necessary.

Steps to follow

  1. 1

    Check Connection

    Ensure the LAN cable is fully seated.

  2. 2

    System Check

    Check the printer front panel for network error messages.

  3. 3

    Configuration Reset

    Restore network settings to factory defaults if the error persists.

Frequently asked questions

It is a network-related communication error on the Xerox Phaser 6510.

Yes, USB printing is usually unaffected by this network error.

Assign a static IP address to your printer via the web interface.