016-758B235

Xerox B235 Error 016-758: Network Fault Solution

Xerox B235 error 016-758 is a notification related to network configuration and communication protocols. It usually appears when the printer cannot reach the print server or gateway. This issue is typically logical and solvable through network resets or firmware updates. The Xerox B235 is a reliable multifunction printer built for demanding workgroups.

1 views

Common causes

  • 1IP address conflict within the local network.
  • 2Outdated network protocol version.
  • 3Defective network cable or damaged LAN port.
  • 4Incorrect DNS configuration in the printer panel.

Solutions

Diagnóstico rápido

The 016-758 code is triggered when the printer detects a route table discrepancy or a network timeout. If other devices are connected, the root cause is likely the printer settings.

Solución paso a paso

  1. Check Cables: Ensure the Ethernet cable is secure and undamaged.
  2. Static IP: Navigate to the network settings and set a static IP address outside the DHCP pool.
  3. Network Reset: Reset network configurations to factory defaults via the menu.
  4. Connectivity Ping: Use a computer to ping the printer's IP to verify responsiveness.

Prevención y mantenimiento

Avoid frequent IP changes by configuring address reservations on your router. Update the firmware periodically to ensure protocols stay compatible. Use genuine Xerox toner to maintain optimal internal system health.

Cuándo llamar a un técnico

If the error persists after a full network reset, there may be internal damage to the network interface card (NIC) needing professional replacement.

Ficha técnica del equipo

  • Technology: Monochrome Laser Multifunction.
  • Speed: Up to 36 ppm.
  • Connectivity: USB, Wi-Fi, Ethernet, NFC.
  • Input capacity: 250-sheet tray.
  • Compatible supplies: Xerox B225/B230 toner series.
  • Recommended use: Small business offices.
  • Official drivers / firmware

Steps to follow

  1. 1

    Check IP

    Verify static IP settings in the printer network menu.

  2. 2

    Network reset

    Reset network settings to factory defaults.

  3. 3

    Firmware update

    Download the latest version from Xerox support.

Frequently asked questions

This code flags a network protocol mismatch or invalid IP configuration.

Yes, it completely prevents network printing until resolved.

It uses the B225/B230 toner cartridge series.

Use static IP reservations on your router.