016-750WorkCentre 4265

Xerox WorkCentre 4265 error 016-750: Networking Fix

The Xerox WorkCentre 4265 error 016-750 is a network connectivity fault, often appearing when scanning to a network folder. This happens when the device cannot authenticate with the SMB server. Follow this guide to troubleshoot and restore scanning features.

1 views

Common causes

  • 1Network credential mismatch.
  • 2SMB version incompatibility with the server.
  • 3Server IP change.
  • 4DNS resolution failure.

Solutions

Diagnóstico rápido

The 016-750 error typically arises when scan-to-folder protocols are interrupted by firewall or credential changes.

Solución paso a paso

  1. Check network status: Verify if the printer is visible in the local network.
  2. Update credentials: Ensure username and password for the target folder are correct.
  3. SMB Version: Check that your network server uses SMBv2 or newer.
  4. Reboot: Restart the system to refresh the interface.

Prevención y mantenimiento

Regularly check your network configuration and cabling. Keep the firmware updated to maintain protocol compatibility. Original toner usage prevents internal contamination.

Cuándo llamar a un técnico

If the error persists after verifying network credentials, the network interface card might need inspection.

Ficha técnica del equipo

  • Technology: Laser Multifunction
  • Speed: Up to 55 ppm
  • Connectivity: Gigabit Ethernet, USB
  • Capacity: 620 sheets
  • Consumable: Xerox 106R02738 toner
  • Use case: Enterprise environments
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check IP

    Ensure the device has a static IP address.

  2. 2

    Verify SMB

    Confirm the server supports SMBv2/v3.

  3. 3

    Restart

    Power cycle the printer to reset the network cache.

Frequently asked questions

This indicates a communication error, usually during scan-to-network jobs.

It is a configuration issue that prevents document routing to folders.

Always use original Xerox 106R02738 toner cartridges for best results.

Keep your printer firmware updated and monitor Ethernet connection status.