016-749VersaLink C7130

Xerox VersaLink C7130 error 016-749: Troubleshooting

The Xerox VersaLink C7130 error 016-749 typically appears during copy or scan jobs when there is an incompatibility between the size configured on the screen and the physical document loaded. If you are asking why does my Xerox VersaLink C7130 show error 016-749, the cause is usually a failed automatic size detection setting.

1 views

Common causes

  • 1Scanned document outside the detected margins.
  • 2Incorrect print driver configuration.
  • 3Dirty paper size sensors.
  • 4Loose or incorrectly set tray guides.

Solutions

Quick Diagnosis

This error occurs when the sensor detects a paper format that differs from the printer driver requirements. Ensure that the loaded paper matches the print driver settings.

Step-by-Step Solution

  1. Cancel the waiting job from the control panel.
  2. Adjust paper guides to fit the actual paper load size.
  3. Verify settings on the printer so that paper size is set to 'Auto Detect'.
  4. Resend the job to print.

Prevention and Maintenance

Avoid mixing paper weights in the same tray. Keep paper sensors clean and free of paper dust.

When to Call a Technician

If the paper sensor fails to detect the size even with the tray correctly adjusted, the internal optical sensor may have failed.

Device Technical Specifications

  • Technology: Color Laser Printer
  • Speed: 30 ppm
  • Connectivity: Ethernet, USB, Wi-Fi
  • Capacity: Configurable trays
  • Compatible Consumable: Xerox VersaLink C7100 Series
  • Recommended Use: Corporate environments
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check size

    Verify if the selected paper size matches the actual document.

  2. 2

    Adjust tray

    Ensure the paper tray guides are properly adjusted to the stack.

  3. 3

    Reset job

    Cancel the current job from the control panel and restart.

Frequently asked questions

The 016-749 code signals a mismatch between the configured document size and the physical paper.

By setting the automatic paper size detection feature in the control panel.

It uses the Xerox VersaLink C7100 Series.

Monthly updates are recommended to avoid communication errors.