016-749VersaLink C625

Xerox VersaLink C625 error 016-749: Networking Fix

The Xerox VersaLink C625 error 016-749 is triggered by a TCP/IP network parameter conflict. Users often ask how to fix Xerox 016-749 when the printer fails to communicate with the network server. This is a common issue in enterprise settings where IP management is strict, and our guide helps you resolve it quickly.

1 views

Common causes

  • 1Duplicate IP address in LAN.
  • 2Incorrect Subnet Mask.
  • 3Failed DNS server communication.
  • 4Physical cable damage.

Solutions

Diagnóstico rápido

This error occurs when the device detects that its IP configuration is either duplicated or invalid in relation to the network's subnet mask or default gateway.

Solución paso a paso

  1. Settings Menu: Navigate to Device > Network on the main display.
  2. Check IP: Verify that the assigned IP address is unique and not in use by another machine.
  3. Switch to Static: Disable DHCP and assign a static address to ensure long-term stability.
  4. Power Cycle: Reboot the machine to apply network settings.

Prevención y mantenimiento

Assign static IPs to all office printers to prevent the router from assigning them to other clients. Keep network cables in good condition to avoid packet loss.

Cuándo llamar a un técnico

If the error screen persists after setting a correct static IP, you may have a hardware issue with the network interface card (NIC).

Ficha técnica del equipo

  • Technology: Color Laser MFP.
  • Speed: 55 ppm.
  • Connectivity: Gigabit Ethernet, USB 3.0.
  • Capacity: 620 sheets base.
  • Compatible supplies: VersaLink C625 series toner kits.
  • Use case: Enterprise office.
  • Official drivers / firmware

Steps to follow

  1. 1

    Check IP

    Verify the IP configuration on the control panel.

  2. 2

    Reset Network

    Access system settings and reset the network stack.

  3. 3

    Verify Connectivity

    Perform a ping test from your workstation.

Frequently asked questions

Assign a static IP address to the printer to avoid conflicts within the DHCP range.

Yes, it creates a communication loop that effectively pauses print jobs.

The printer uses VersaLink C625 series color toner kits.

Networking stability depends on consistent IP assignment and clean Ethernet connections.