016-749Phaser 3610

Xerox Phaser 3610 error 016-749: Network Configuration Fix

The Xerox Phaser 3610 error 016-749 relates to IP configuration and network communication failures. When the printer cannot establish a valid connection, this warning appears. Knowing why is my Xerox Phaser 3610 showing error 016-749 allows you to troubleshoot the network settings and resume printing without specialized help.

1 views

Common causes

  • 1IP Conflict: Another device shares the static IP address.
  • 2Router failure: DHCP server is not providing a lease.
  • 3Damaged Cable: Faulty wiring prevents signal transmission.
  • 4Network migration: IP range was updated but printer settings remain old.

Solutions

Diagnóstico rápido

The 016-749 error typically appears when the network configuration is mismatched with the local router. If you see this on your display, it means the printer is effectively offline from the local area network (LAN).

Solución paso a paso

  1. Check cable: Verify the Ethernet cable is secure.
  2. Network menu: Access the printer's network settings menu.
  3. Set IP: Change the connection type from DHCP to Manual and input a static IP address.
  4. Test connection: Print a configuration page to confirm network settings.
  5. Restart: Cycle power to apply new network parameters.

Prevención y mantenimiento

Assign a static IP address outside the router's DHCP range to ensure consistent connectivity. Regularly update the firmware to maintain protocol compatibility.

Cuándo llamar a un técnico

If you cannot assign an IP or the network light on the port does not blink, the internal LAN card may be faulty and require repair.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Speed: 47 ppm
  • Connectivity: 10/100/1000 Base-T Ethernet
  • Feed Capacity: 550 to 2,350 sheets
  • Compatible Consumable: 106R02731 / 106R02735 toner
  • Recommended Use: High-volume workgroups
  • Drivers / Official Firmware

Steps to follow

  1. 1

    Check cable

    Ensure the Ethernet cable is firmly plugged in at both ends.

  2. 2

    Network menu

    Access the System > Network Settings menu on the control panel.

  3. 3

    Set IP

    Switch from DHCP to Manual IP settings if needed.

  4. 4

    Save settings

    Apply settings and restart the printer.

Frequently asked questions

This code indicates a network connectivity issue or a conflict in IP address assignment.

It is essential for network printing. The device will be unavailable until the IP configuration is corrected.

It uses 106R02731 toner cartridges. Toner is unrelated to network errors.

Assign a static IP address to the printer to avoid conflicts within the local network.