016-512AltaLink C8030

Xerox AltaLink C8030 Error 016-512: Memory Error

The Xerox AltaLink C8030 error 016-512 represents a memory processing failure. When the MFP receives data that exceeds its available RAM capacity, it triggers this protective state to avoid system crashes. To troubleshoot 016-512 error on AltaLink C8030, you must cancel all pending print tasks and reboot the machine.

0 views

Common causes

  • 1Overloaded print queue with large, complex files.
  • 2Outdated print drivers on network servers.
  • 3Corrupted print job data causing memory leaks.
  • 4Physical failure of the internal system RAM.

Solutions

Diagnóstico rápido

If you see this error, check the pending jobs in your network queue. Highly complex documents, such as high-resolution graphics, are often the primary cause of memory saturation.

Solución paso a paso

  1. Cancel all jobs from the control panel display.
  2. Restart the system by powering off at the main switch and leaving it unplugged for 60 seconds.
  3. Clear printer spooler settings on the sender PC to ensure no corrupted data is re-sent.
  4. Print a test page to verify that memory has been freed.

Prevención y mantenimiento

Ensure your printer drivers are up to date and optimize document sizes before printing to prevent memory overflows.

Cuándo llamar a un técnico

If the error persists with simple documents, the printer's internal RAM may have suffered a physical failure and requires professional assessment.

Ficha técnica del equipo

  • Technology: Color Laser Multifunction
  • Speed: 30 ppm
  • Standard RAM: 8 GB
  • Compatible Consumables: AltaLink C8030 Series Toner (CMYK)
  • Connectivity: Gigabit Ethernet, USB 3.0
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Cancel all jobs

    Access the device control panel and clear the pending print jobs from the queue.

  2. 2

    Power cycle

    Switch off the unit, unplug from the power source for one minute, and restart.

  3. 3

    Update drivers

    Verify that all network workstations are using the latest print drivers.

Frequently asked questions

This happens when the RAM is overwhelmed by overly complex files, leading to a memory overflow.

No, a simple clear of the print queue and a full restart is usually enough to resolve it.

We recommend using genuine Xerox AltaLink C8000 series toner cartridges.

Avoid sending excessively large PDF files or complex high-resolution vector images directly to the machine.