012-160AltaLink C8145

Fix Xerox AltaLink C8145 Error 012-160: DADF Troubleshooting

Error code 012-160 indicates a failure in the document feeder unit (DADF). This typically occurs due to feed path obstructions or worn-out feed rollers causing misfeeds. Regular maintenance is key to keeping the document feeder operational.

1 views

Common causes

  • 1Dust and dirt buildup on feed rollers.
  • 2Accidental introduction of staples or paperclips.
  • 3Obstructed sensors in the paper path.

Solutions

Roller Cleaning

  1. Open the DADF top cover.
  2. Clean rollers using a cloth dampened with distilled water.
  3. Use a dry cloth to remove any moisture.

Clearing Obstacles

  1. Gently pull out any jammed sheets.
  2. Inspect sensors for stuck debris or paper scraps.

Steps to follow

  1. 1

    Open Feeder

    Open the document feeder assembly cover.

  2. 2

    Check Path

    Search the entire paper path for any scraps or hidden jams.

  3. 3

    Test Feed

    Close the cover and attempt to scan a single sheet.

Frequently asked questions

No. Feed rollers need friction to operate, and oil will cause slippage.

Always ensure your documents are clean and free of staples before feeding.

The DADF motor or sensor may need replacement by a certified technician.