010-333AltaLink C8135

Xerox AltaLink C8135 error 010-333: Temp sensor fault

The Xerox AltaLink C8135 error 010-333 indicates that the temperature sensor within the fuser unit has identified an irregular heating cycle. This requires the device to lock down to avoid further damage. Solving the Xerox AltaLink C8135 error 010-333 usually requires professional technical evaluation of the fuser thermistor or heating lamp.

1 views

Common causes

  • 1Disconnected temp sensor.
  • 2Heater lamp failure.
  • 3Overheating history.
  • 4Thermistor wear.

Solutions

Quick Diagnostics

When Xerox AltaLink C8135 error 010-333 shows, the printer has detected an abnormal sensor reading. Why does Xerox show error 010-333? Often due to a faulty thermistor.

Step-by-Step Solution

  1. Shut down completely.
  2. Allow a 20-minute cooling period.
  3. Verify power cable connection.
  4. Reboot the machine.

Maintenance and Prevention

Use a surge protector. Schedule regular technical checkups.

When to Call a Technician

If the reset does not fix the issue, you must replace the fuser assembly.

Technical Specifications

  • Technology: Color Laser
  • Connectivity: LAN
  • Consumable: AltaLink Toner
  • Maintenance: Professional replacement
  • Official Drivers

Steps to follow

  1. 1

    Power off

    Unplug for 15 minutes to allow sensor reset.

  2. 2

    Inspect

    Check for debris in the fuser exit path.

  3. 3

    Restart

    Power up and check for error persistence.

Frequently asked questions

The temperature sensor cannot confirm proper fuser heating.

No, the printer stops to prevent potential fire hazards.

No, it is a hardware fuser fault.

Ensure proper voltage stability and regular maintenance.