010-330AltaLink B8090

Xerox AltaLink B8090 Error 010-330: Fuser Failure

The Xerox AltaLink B8090 error 010-330 signals a critical thermal error in the fuser unit assembly. It occurs when the machine fails to heat the roller to the standard temperature required for proper toner adhesion.

1 views

Common causes

  • 1Burned out fuser lamp.
  • 2Thermal fuse triggered.
  • 3Connection failure in fuser module.
  • 4High-voltage power board malfunction.

Solutions

Diagnóstico rápido

If the 010-330 occurs during startup, the heating element is likely failing. Perform a hard reboot to check if it resolves.

Solución paso a paso

  1. Power off the device.
  2. Ensure it is connected to a dedicated power line.
  3. Check for paper jams in the fusing area.
  4. Restart the MFP.

Prevención y mantenimiento

Replace fuser modules before they reach their end-of-life count to avoid unexpected failures during production.

Cuándo llamar a un técnico

If the machine stays in error, a Xerox certified technician needs to replace the fusing unit.

Ficha técnica del equipo