010-327D110DNI

Xerox D110DNI error 010-327: Fix and troubleshooting

The Xerox D110DNI error 010-327 occurs when the fuser temperature sensor detects an abnormal heat level. This is a common safety trigger meant to protect your device during complex print jobs. To resolve this, ensure the cooling system is unobstructed and clear any paper debris from the exit path.

1 views

Common causes

  • 1Paper jam blocking the temperature sensor.
  • 2Expired fuser heat lamp.
  • 3Unstable power input.
  • 4Excessive toner buildup on heat rollers.

Solutions

Diagnóstico rápido

Error 010-327 means the printer has failed to reach or maintain the correct fuser temperature. If the machine was running hot before the error appeared, it's likely a standard thermal protective shutdown.

Solución paso a paso

  1. Shut down the printer immediately.
  2. Clear the paper path by checking the internal fuser module.
  3. Wait 10 minutes for the components to cool down.
  4. Power on and monitor the status screen.

Prevención y mantenimiento

Ensure good ventilation around the exhaust fans. Schedule annual fuser cleaning and roller inspections to keep sensors operating accurately.

Cuándo llamar a un técnico

If the error repeats immediately after a cool-start, the thermistor or the heating element has failed and requires a technician's expertise.

Ficha técnica del equipo

  • Technology: Laser electrophotography.
  • Speed: Up to 110 ppm.
  • Connectivity: Ethernet 10/100/1000 Base-T.
  • Feed capacity: Up to 4000 sheets.
  • Consumible compatible: Xerox D110/D125 toner cartridges.
  • Recommended use: Heavy office duty.
  • Official drivers / firmware

Steps to follow

  1. 1

    Power off

    Turn off the printer and unplug it for 10 minutes to cool down.

  2. 2

    Inspect fuser

    Check the right-side door for paper jams near the fuser unit.

  3. 3

    Restart unit

    Plug in and power on the machine to reset the temperature sensor.

Frequently asked questions

Clear any paper jams, turn off the printer for a few minutes, and restart. If the error returns, it may be a hardware component failure.

No, this error indicates a temperature regulation failure that can cause permanent damage to your printer.

Use authentic Xerox toner cartridges for the D110/D125 family to ensure consistency.

Keep the printer area dust-free and avoid extreme office temperatures.