010-320WorkCentre 5945i

Xerox WorkCentre 5945i error 010-320 fix

The Xerox WorkCentre 5945i error 010-320 is a thermal alert related to the fuser assembly. It prevents the machine from printing until the correct temperature is reached. Proper maintenance is key to avoiding this fault.

0 views

Common causes

  • 1Fuser failure: Defective heat lamp.
  • 2Thermistor clogged: Thermal sensor reading failure.
  • 3Thermal fuse: Triggered by over-heating.
  • 4Paper contamination: Debris obstructing the path.

Solutions

Diagnóstico rápido

The error code pops up during warmup. If it appears instantly upon power-up, it is likely a broken fuser thermistor.

Solución paso a paso

  1. Power off the machine completely.
  2. Allow the fuser to cool down completely.
  3. Carefully extract the fuser unit.
  4. Check the rollers for paper debris.
  5. Reinstall the unit and restart.

Prevención y mantenimiento

Use original Xerox toner, which is optimized for specific melting points. Schedule regular maintenance of the fuser assembly.

Cuándo llamar a un técnico

The error 010-320 often requires a certified Xerox technician to replace the heating element.

Ficha técnica del equipo

  • Technology: Monochrome Laser MFP.
  • Speed: 45 ppm.
  • Connectivity: Ethernet, USB.
  • Compatible Consumables: WC 5945 maintenance kits.
  • Use Case: Enterprise Office.
  • Drivers / firmware official

Steps to follow

  1. 1

    Power off

    Shut down the printer for 30 seconds.

  2. 2

    Inspect fuser

    Remove the fuser module and check for obstructions.

  3. 3

    Retry

    Reinsert and power back on.

Frequently asked questions

It indicates a critical fuser temperature failure; the sensor detects insufficient heat.

Yes, it must be repaired to prevent print quality issues.

Requires WorkCentre 5945 maintenance kits.

Use original supplies and standard paper.