010-320WorkCentre 3655

Xerox WorkCentre 3655 Error 010-320 Fix

The Xerox WorkCentre 3655 error 010-320 indicates a critical thermal issue with the fuser assembly. This is often caused by the fuser failing to heat to the specified operating temperature, or a failure in the heating lamp itself.

1 views

Common causes

  • 1Fuser lamp malfunction
  • 2Voltage instability
  • 3Thermistor error
  • 4Paper jam blockage

Solutions

Diagnóstico rápido

Why is my Xerox WorkCentre 3655 error 010-320 appearing? The system detects insufficient heat in the fuser unit.

Solución paso a paso

  1. Power down the unit fully.
  2. Disconnect power cord for 15 minutes.
  3. Inspect fuser path for debris.
  4. Restart the machine.

Prevención y mantenimiento

Use original Xerox consumables for consistent heat transfer. Avoid excessive paper dust buildup.

Cuándo llamar a un técnico

If the reset doesn't work, the fuser assembly must be replaced.

Ficha técnica del equipo

  • Technology: Laser
  • Speed: 47 ppm
  • Connectivity: USB, Ethernet
  • Consumible: 3655 Series Toner
  • Usage: Corporate
  • Official Drivers

Steps to follow

  1. 1

    Power off

    Shut down the printer safely.

  2. 2

    Inspect

    Check the fuser compartment for paper jams.

  3. 3

    Reboot

    Wait 15 minutes and restart.

Frequently asked questions

It denotes a fuser warming-up failure.

No, it must be cleared for operation.

Genuine 3655 series toner is essential.

Regular cleaning prevents thermal build-up.