010-320WorkCentre 3345

Xerox WorkCentre 3345 error 010-320: Fuser fix

The Xerox WorkCentre 3345 error 010-320 indicates the fuser is failing to heat properly. Read this guide to understand why my Xerox WorkCentre 3345 error 010-320 is happening.

1 views

Common causes

  • 1Failing fuser lamp.
  • 2Defective thermal sensor.
  • 3Debris in the paper path.
  • 4Power surges.

Solutions

Quick Diagnosis

If you see 010-320, the fuser temperature sensors are flagging a fault. Check the rear exit.

Step-by-Step Solution

  1. Cooling: Let the machine sit for 20 minutes.
  2. Inspect: Check fuser area for paper.
  3. Power cycle: Reboot after cooling.
  4. Test: Run a status print.

Prevention and Maintenance

Use correct paper weights. Keep interior dust-free. Use original Xerox toner.

When to call a technician

If the reboot fails, the fuser unit needs a physical replacement.

Device Technical Specifications

Steps to follow

  1. 1

    Cooling phase

    Turn off for 20 minutes.

  2. 2

    Check path

    Remove any paper jam remnants.

  3. 3

    Restart

    Power cycle.

Frequently asked questions

Error 010-320 indicates a fuser heating failure, likely a bad lamp or thermal sensor.

The printer locks itself as a safety precaution against overheating.

Always use original Xerox 106R series toners.

Fuser replacement by a technician is required.