010-320Xerox VersaLink B405

Fix Error 010-320 Xerox VersaLink B405: Fuser Fault

Error 010-320 is a thermal warning regarding the fuser module in the Xerox VersaLink B405. It occurs when the heating system fails to reach operating temperature. This is a critical error that requires attention to prevent hardware damage.

1 views

Common causes

  • 1Unstable voltage from the local power grid.
  • 2Natural wear of the fuser heating elements.
  • 3Thermistor failure preventing accurate temperature detection.

Solutions

Voltage Verification

  1. Unplug the printer from any surge protector and plug it directly into a wall outlet.
  2. Ensure the power cable is firmly seated in the socket.
  3. Allow the machine to cool down for 20 minutes before restarting.

Steps to follow

  1. 1

    Cool down

    Power off the printer and let it cool completely to avoid heating cycle errors.

  2. 2

    Power supply check

    Connect the power cord directly to a wall outlet to rule out surge protector issues.

  3. 3

    System restart

    Turn the unit back on and check if the warming-up process completes successfully.

Frequently asked questions

Error 010-320 indicates the fuser cannot heat up. It is not dangerous, but the printer will remain non-functional until resolved.

You can verify the power source, but if the fuser itself is damaged, it requires replacement by a qualified technician.

Use a proper voltage regulator to protect electronic components from power surges.