010-310B235

Xerox B235 Error 010-310: Fuser Unit Troubleshooting

The Xerox B235 error 010-310 is a critical fuser unit fault. It triggers when the thermistor detects abnormal temperatures. If you see the Xerox B235 error 010-310, shut down the device immediately to prevent further damage to internal parts. This multifuncional printer is efficient, but the fuser unit is sensitive to electrical stability.

1 views

Common causes

  • 1Thermistor failure
  • 2Power supply spike
  • 3Cooling fan blockage
  • 4Fuser life expiration

Solutions

Diagnóstico rápido

If the error 010-310 appears, check if the printer is plugged into a surge protector. Direct connection to a wall outlet is required for fuser stability.

Solución paso a paso

  1. Turn off the printer.
  2. Disconnect from power for 20 minutes.
  3. Check for paper debris in the fuser exit.
  4. Power on and test.

Prevención y mantenimiento

Ensure regular firmware updates to manage heat cycles better. Avoid low-quality paper that might jam near the fuser.

Cuándo llamar a un técnico

If the error returns, the fuser assembly itself is likely faulty and requires a hardware service.

Ficha técnica del equipo

  • Technology: Monochrome Laser.
  • Speed: Up to 36 ppm.
  • Connectivity: Wi-Fi, Ethernet, USB.
  • Consumible: Xerox B235 (B230 series) Toner.
  • Official Drivers

Steps to follow

  1. 1

    Cool down

    Power off and let the unit cool for 20 minutes.

  2. 2

    Check power

    Plug directly into a wall outlet.

  3. 3

    Restart

    Power on and verify if the error is cleared.

Frequently asked questions

It is a thermal shutdown code caused by fuser overheating or thermistor failure.

It is a critical temperature error and requires immediate attention.

Uses B230/B235 series cartridges.

Use proper paper weight and avoid constant high-volume cycles.