003-910B230

Xerox B230 error 003-910: Network connection fix

The Xerox B230 error 003-910 typically indicates a network communication failure. This alert prevents the printer from receiving data from your PC or server. You can resolve this issue by checking your network cabling or router settings.

1 views

Common causes

  • 1Duplicate IP address in network.
  • 2Faulty router hardware.
  • 3Corrupt network configuration.
  • 4Interrupted printer firmware.

Solutions

Quick Diagnosis

Check if your network lights are blinking normally. An error 003-910 often follows a brief internet outage.

Step-by-Step Solution

  1. Power off the printer and your router.
  2. Check all Ethernet connections for loose cables.
  3. Power up the router first, then the printer.
  4. Reset network settings via the printer menu.

Prevention and Maintenance

Use high-quality shielded cables. Keep firmware updated and use original Xerox toner for optimal sensor readings.

When to Call a Technician

If the network port on the printer remains unresponsive after manual resets, the motherboard may need service.

Equipment Technical Data

  • Technology: Monochrome Laser
  • Speed: Up to 36 ppm
  • Connectivity: Wi-Fi, USB, Ethernet
  • Compatible Consumable: B230 toner series
  • Drivers / firmware: https://www.xerox.com/support/b230

Steps to follow

  1. 1

    Power Cycle

    Turn off printer and router for 30 seconds.

  2. 2

    Cable Check

    Ensure physical network cable is secure.

  3. 3

    Network Reset

    Navigate to the printer menu and reset to factory defaults.

Frequently asked questions

Perform a power cycle and verify your local network cable connection.

Usually it is a software/network conflict, not hardware.

Use original B230 series cartridges to avoid sensor errors.

Check for updates once every six months to ensure stability.

Xerox B230 error 003-910: Network connection fix | Vimazdev