002B2502

OKI B2502 Error 002: Paper Feed Issues

The oki B2502 error 002 points to a paper feed failure, usually detected by sensors at the entrance of the printer. Ensuring the paper guides match the paper size exactly is critical for reducing this error. If you face constant paper feed problems, routine maintenance of the rollers is highly recommended.

0 views

Common causes

  • 1Incorrectly aligned paper guides.
  • 2Worn-out rubber pick-up rollers.
  • 3Dust accumulation on feed sensors.
  • 4Over-filled paper tray causing slipping.

Solutions

Quick Diagnosis

Error 002 is triggered when the printer fails to pull the sheet within a specific timeframe. Always check for curled or overly humid paper.

Step-by-step Solution

  1. Empty Tray: Remove the paper stack from the main tray.
  2. Clear Debris: Check the pick-up roller area for paper scraps.
  3. Reload: Reinsert paper, ensuring guides are snug but not tight.
  4. Reset: Close the tray firmly to signal to the sensor that paper is ready.

Prevention and Maintenance

Use proper storage for paper. Dust can build up on rollers, reducing friction; wipe them with a damp cloth periodically.

When to Call a Technician

If the rollers have lost their grip or the internal feed motor sounds unusual, contact a service technician.

Equipment Technical Data

  • Technology: Laser
  • Consumable: B2502 series toner
  • Drivers / firmware: Support Site
OKI B2502 Error 002: Paper Feed Issues | Vimazdev