00010006SureColor F2100

Epson SureColor F2100 Error 00010006: Troubleshooting Guide

The Epson SureColor F2100 error 00010006 typically triggers when the system detects an inconsistency in ink flow reaching the print head. This prevents the printer from executing cycles correctly, resulting in a system halt. Addressing this issue requires verifying the ink delivery system components to restore normal functionality.

2 views

Common causes

  • 1Air bubbles trapped in ink lines after replacement.
  • 2Mechanical wear on ink bag valves.
  • 3Partial obstruction in the ink delivery tubing.
  • 4Electronic failure of the print head pressure sensor.

Solutions

Quick Diagnosis

Error 00010006 appears when the equipment senses a pressure drop in the ink lines. If you notice unusual noises near the carriage or visible air bubbles in the supply tubes, this error is clearly related to the ink supply path.

Step-by-Step Solution

  1. Safe Shutdown: Power off the machine and disconnect it from the power source for one minute.
  2. Check Ink Bags: Open the ink bay and ensure every ink bag is fully seated with no obstructions.
  3. Inspect Lines: Check for any kinks or leaks in the ink lines leading to the head assembly.
  4. Deep Cleaning: Power on the printer and trigger a full head cleaning cycle from the maintenance menu.

Prevention and Maintenance

To prevent recurrence, follow manufacturer guidelines for shaking ink bags during replacement. Keep the room temperature stable between 15°C and 30°C. Using genuine Epson inks is vital for maintaining proper viscosity and preventing clogging.

When to Call a Technician

If the error persists after a full cleaning cycle, the ink pump or pressure sensor may need replacement by certified support personnel.

Technical Specifications

  • Technology: Direct-to-Garment (DTG) inkjet.
  • Speed: Up to 27 seconds for standard prints.
  • Connectivity: High-Speed USB 2.0, LAN 1000Base-T.
  • Supply Capacity: 600ml ink bag system.
  • Compatible Consumables: UltraChrome DG series (C, M, Y, K, White).
  • Recommended Use: Continuous industrial textile printing.
  • Official Drivers / Firmware

Steps to follow

  1. 1

    System Reset

    Power off the printer, unplug the power cable for 60 seconds, and restart.

  2. 2

    Ink Bag Inspection

    Ensure all ink bags are properly docked and free of kinks.

  3. 3

    Run Cleaning Cycle

    Use the control panel to initiate a deep print head cleaning cycle.

Frequently asked questions

This error points to an issue with ink pressure or supply to the print head, often caused by trapped air or a miscalibrated sensor.

It is a moderate error that halts printing to protect the print head from damage due to ink starvation.

Only use genuine Epson UltraChrome DG and DG2 ink series.

Weekly checks of ink levels and cleaning the capping station are recommended.

Epson SureColor F2100 Error 00010006: Troubleshooting Guide | Vimazdev