000041Epson EcoTank ET-4850

Epson EcoTank ET-4850 Error 000041: Troubleshooting Guide

The 000041 error code on the Epson EcoTank ET-4850 indicates a scanner motor blockage. This prevents the scanner carriage from completing its initialization sequence, affecting both scanning and copying tasks. Resolving this issue is critical to restore full functionality.

1 views

Common causes

  • 1Physical debris blocking the scanner carriage.
  • 2Scanner motor malfunction due to wear.
  • 3Internal communication error between the scanner and PCB.

Solutions

Hard Power Cycle

  1. Turn off the printer.
  2. Disconnect the power cable for one minute.
  3. Reconnect and power on.

Clearing Obstructions

  1. Lift the scanner lid.
  2. Inspect the scanner track for debris or paper residue.
  3. Clean with a dry, lint-free cloth.

Steps to follow

  1. 1

    Power down

    Turn off the printer using the front button.

  2. 2

    Visual check

    Lift the cover and check for any movement blockage.

  3. 3

    Power reset

    Disconnect from the power outlet for 60 seconds before restarting.

Frequently asked questions

It is a scanner unit failure, typically a mechanical movement error.

Yes, printing usually works, but the device may remain in an error state preventing other operations.

If the error persists after rebooting, professional service is likely required.

Epson EcoTank ET-4850 Error 000041: Troubleshooting Guide | Vimazdev